|
View Enquiry Basket
Bus Interior Lighting Solutions
Manufacturing almost 100,000 light fixtures annually, Power Electronics is by far the largest supplier of lighting systems, bus lighting system, bus interior lighting systems to the Indian bus & coach industry.
Presently, lighting forms an integral part of the vehicle interiors. Power Electronics offers standard & tailored solutions to customer needs. This flexibility, supported by in-house design expertise, is the key to our success.
Fluorescent light systems from PE are versatile & robust, meeting the highly demanding operating conditions of the Indian sub-continent. All fixtures are delivered fully wired and ready to fit; this saves the bus builder time and labor costs.
There are 2 distinct types of fluorescent lamp fixtures:
1. Semi-recessed - partly recessed into the roof of the bus, needs cutout
2. Surface mounted - installed on the roof surface, no cutouts required
Energy efficiency demands replacing conventional incandescent lamps (bulbs) with fluorescent tubes which are very efficient, with little loss of energy by way of heat.
Power Electronics designs & manufactures high efficiency low voltage inverters for fluorescent lamps.
These inverters are to operate on 12V / 24V DC (needs to be specified) and can light a lamp ranging from 8W to 36W. |
 
 |
PLSS-18ADC 1mm thick white powder coated MS tray, 18W/2ft TFL (Wipro make), electronic inverter to operate at 24V DC or 12V DC (needs to be specified), surface mount, slim fixture with diffuser in acrylic finish and plastic end covers. |
Add to Enquiry Basket  
|
PLS-18A 1mm thick white powder coated MS tray, 18W/2ft TFL (Wipro make), electronic inverter to operate at 24V DC or 12V DC (needs to be specified), available both in surface mount & semi-recessed versions and diffuser in acrylic finish. |
Add to Enquiry Basket
|
PLR-18MS 1mm thick white powder coated MS tray, 18W/2ft TFL (Wipro make), electronic inverter to operate at 24V DC or 12V DC (needs to be specified), surface mount and 0.7mm thick white powder coated slotted MS diffuser. |
Add to Enquiry Basket
|
PLS-11AB 1mm thick white powder coated MS tray, 11W CFL (Osram make), electronic inverter to operate at 24V DC or 12V DC (needs to be specified), MS end caps with 2 slots, surface mounting and acrylic diffuser. |
Add to Enquiry Basket
|
PLR-11A 1mm thick white powder coated MS tray, 11W CFL (Osram make), electronic inverter to operate at 24V DC or 12V DC (needs to be specified), semi-recessed mounting and diffuser in acrylic finish. |
Add to Enquiry Basket
|
DMRC 1.2mm thick white powder coated MS tray, 5 numbers of 18W fluorescent lamps (Wirpo make), electronic inverters to operate at 24V DC or 12V DC (needs to be specified), surface mount and acrylic diffusers. The end caps and mid caps are in stainless steel finish.
This fitting has been specially developed for the smaller DMRC buses on behest of Tata Motors and the total length of each fitting is 3.5m |
Add to Enquiry Basket
|
Inverters For Fluorescent Lamps High efficiency low voltage inverters for fluorescent lamps.
Features:
• 8 W to 58 W
• Night light option
• +/- 20 % voltage tolerance
• High frequency
• Reverse polarity protection
• Short & open circuit protection
• Ease of installation
• Robustly designed to provide many years of service
• Maximizes the life expectancy of standard commercially available tubes
• For installations in confined spaces, offers an ideal package size
• Supplied with flying leads for the fluorescent tube and input
• Automatically runs at minimal power in the event of a tube failure or fault
• Twin tubes option for increased
• Also manufactured to customer specifications.
Approvals:
• IS:7027-1984 – tested at CIRT
ASRTU compliance
Principle markets include:
• Bus & Coach
• Rail
• Solar & Renewable Energy
• Energy Conservation |
Add to Enquiry Basket
|
Showcase
View all our products / services as a slide show.
Play Now
 
|
© Power Electronics, All Rights Reserved. (Terms of Use)
